Chain-Out; Connections; Table 2-C Chain-Out Pinout - ADTRAN TSU 600 User Manual

Chapter 2. Installation

Chain-out

Connections

3 2
This is used to connect to another TSU 600 Chain-in
connector. See Table 2-C for the pinout for the chain-
out connector.
The chain-out connections are as follows:
Connector type
Part number
PIN NAME
1 GND
2 UNUSED
3 TX DATA
4 UNUSED
5 RX DATA
6,7,8 UNUSED
TSU 600 User Manual
RJ-48
AMP# 555164-2
DESCRIPTION
Ground - connected to unit chassis.
Connected to GND of next unit (pin 1).
Data transmitted to chained units by the
TSU 600. Connect to RX DATA of the next
unit (chain in pin 3).
Data received from chained units by the
TSU 600. Connect to TX DATA of the next
unit (chain in pin 5).
Table 2-C
Chain-out Pinout
61200.076L2-1