Quick Information Screen; To Select User Mode - SystemAir SAVE VTR 150/K User Manual

6 | Operation
4.2.4

Quick Information screen

Quick information screen can be shown instead of a sleep
mode screen.
Quick information screen shows the following
information:
1. Time
2. Outdoor temperature
3. Current User mode / Alarm
4. Fan speed
○○○ – off, ●○○ – Minimum/Low, ●●○ – Normal,
●●● – High/Maximum
5. Supply air temperature
6. Relative humidity (if configured)
7. CO sensor value (if configured)
2
Quick Information screen can be enabled or disabled in
menu System Preferences —> Display Settings
— > Quick Info screen.
4.2.5

To select user mode

For more information about user modes and functions, please check Help menu.
The top circle on the home screen indicates a currently active user mode. Touch the symbol to change the mode.
Duration have to be set for temporary user modes. SAVE VTR 150/K will return to its previous working mode after the
set time expires.
Note:
AUTO mode is available for selection only if the optional Demand Control, Week Schedule and/or
external fan control functions are activated.
4.2.5.1 Permanent modes
Permanent modes are always active unless interrupted by temporary modes, activated user functions or alarms:
254493 | v01