Kaiterra Sensedge Mini Installation Manual page 13

Manual Mode - Prepare for Configuration
If you choose to set up manual mode, please download the Kaiterra Configuration Tool and install it on your
computer.
After the device has been turned on, it will automatically enter the configuration mode for 15 minutes. The
STATUS light will flash in yellow. If your device isn't in configuration mode, please turn off the device and turn
it back on again.
Manual Mode - Connect to network
Open network settings on your computer and look for the Wi-Fi network that starts with "Kaiterra". Connect
your computer to that network.
On the Configuration Tool, you can enter a name for the device (e.g. the location of the device or the serial
number) and a project tag. This will provide easy identification and filtering in the configuration history page
later on to help you quickly connect the device to the Kaiterra dashboard.