Table of Contents
Advertisement
Trouble
A sound of flowing water
Cracking sound is heard
Spray mist from the outlet Mist appears when the room air
The compressor indicator
(red) lights on constantly,
and indoor fan stops.
The fresh air function fails
to start
The noise of the fresh air
function is too large and
the air volume is too
small.
Analysis
Caused by the flow of refrigerant in
the air conditioner, not a trouble.
Defrosting sound in heating mode.
The sound may be generated by the
expansion or contraction of the front
panel due to change of temperature.
becomes very cold because of cool air
discharged from indoor unit during
COOLING or DRY operation mode.
The unit is shifting from heating mode
to defrost.The indicator will lights off
within ten minutes andreturns to
heating mode.
1. The outdoor temperature is too low.
This is normal. To prevent the fresh air
function from greatly reducing the
indoor temperature when the outdoor
temperature is too low, the fresh air
function is forced not to start. After the
outdoor temperature reaches the
standard, the fresh air function will
start automatically (if you do not desire
the fresh air function to start
automatically, please disable the fresh
air function manually).
2. The air conditioner is malfunctioning.
Contact with after-sales personnel for
inspection and maintenance.
The reason may be that the sealing
bag of the purification filter element is
not removed (to ensure the effect of
the filter element, the purification filter
element is packed in a sealed plastic
bag when delivered). In this case,
please carry out check and remove
the sealing bag of the purification filter
element.
NO
Display
1
Running indicator
2
It lights up when the AC is running.
It flashes during defrosting.
Timer indicator
3
It lights up during set time
Sleep indicator
4
It lights up in sleep mode
Compressor indicator
5
It lights up when the compressor is on
Mode indicator
6
Heating displays orange,others display white
7
Signal Receptor
8
Smart WIFI indicator
9
It lights up during WIFI is on
10
FAN ONLY mode indicator
11
It lights up in FAN ONLY mode
Airflow Follow You/Airflow Avoid You
12
indicator
13
Artificial Intelligence Smart Running
AI
14
Indicator
It lights up in AI mode
Fresh air indicator
15
Hinano indicator
16
It lights up in Hinano mode
Example:
4
The symbols may be different from these models, but the functions are similar.
13
Introduction
Temperature indicator
Display set temperature.
It shows FC after 200 hours of usage as
reminder to clean the filter.After filter cleaning
press the filter reset button located on the
indoor unit behind the front panel in order to
reset the display.(optional)
.
Fan speed indicator
NANOE indicator
It lights up in NANOE mode.
Humidity indicator
.
It lights up in humidity mode
1. If the icon lights up, it indicates that the fresh air
function is acting. Red, yellow and green icon
indicators respectively indicate the high, medium
and low levels of CO2 concentration in the room.
2. If the icon flashes for 10 seconds and then goes
out during the activation of the fresh air function, it
indicates that the activation conditions of the fresh
air function are not met (that is, the outdoor
temperature is too low or the communication of the
indoor unit is abnormal). After the activation
conditions are met, the fresh air icon will light up
automatically.
3. If the icon flashes continuously in yellow during
the activation of the fresh air function, it indicates
that the purification filter element needs to be
replaced. After replacement, it is necessary to
cancel the flashing by pressing the SUPER
button for about 5 seconds of the remote controller
.
15
9
14
1
16
13
Advertisement
Table of Contents
