13-10.Vertical Paper Transport - Minolta EP1054 General Instructions Manual

1174SBM1310A
13-10. VERTICAL PAPER TRANSPORT
The sheet of paper taken up by the Paper Take-Up Roll from the Drawer is fed along the
Paper Guide to the Vertical Transport Rollers. The paper fed by the Vertical Transport Roll-
ers reaches the Transport Rollers and is then fed up to the Synchronizing Rollers. The
Transport Rollers are turned and stopped by the Paper Transport Clutch. The Transport
Roller Sensor immediately before the Transport Rollers detects a sheet of paper fed from
the Vertical Transport Section or Manual Bypass Table.
The Cover for the Vertical Transport Section (i.e., the Side Door) can be opened and closed
for clearing misfeeds. The Side Door Detecting Sensor detects whether or not this Cover is
open.
<23 cpm Copier>
Transport
Rollers
Actuator
Transport Roller
Sensor PC51
<Control>
CL2 PWB-A PJ5A-2A
PC54 PWB-A PJ17A-2A
Side Door
Detecting
Sensor PC57
Vertical
Transport
Rollers/Rolls.
1139M067AA
Control Signal Energized
Control Signal
M-52
<15/18 cpm Copier>
Transport
Rollers
Actuator
Transport Roller
Sensor PC51
Deenergized WIRING DIAGRAM
L H
Blocked Unblocked
L H
Side Door
Detecting
Sensor PC57
Vertical
Transport
Rollers/Rolls.
1142M006AA
1174T16MCA
4-B
WIRING DIAGRAM
4-D