Troubleshooting; Αντιμετωπιση Προβληματων; Solución De Problemas - Nespresso CITIZ PLATINUM User Manual

7
T R O U B L E S H O O T I N G
PANNES
FR
DE PROBLEMAS
問題解答
HK
EN
SOLUCIÓN DE PROBLEMAS
ES-LATAM
ΑΝΤΙΜΕΤΩΠΙΣΗ ΠΡΟΒΛΗΜΑΤΩΝ
EL
故障排解
TW KR
No light indicator • Check the power outlet, plug, voltage, and fuse. In
No coffee, no water • First use: fill water tank with warm water
Coffee comes out very slowly • Flow speed depends on the coffee variety.
Coffee is not hot enough • Preheat cup.
Capsule area is leaking
(water in capsule container)
All beverage buttons blinking fast • Machine is in error, overheating or in an environment
Descaling alert blinks during coffee
making (descaling alert level 1)
Descaling alert steady light
(descaling alert level 2)
Irregular blinking • Send appliance to repair or call Nespresso.
No coffee, just water runs out
(despite inserted capsule)
Coffe drops in hot water preparation • Eject any remaining used capsule into the used
문제 해결
‫איתור תקלות‬
case of problems, call Nespresso.
(max. 55 °C / 130 °F) and run through machine
according to instructions on page 11.
• Water tank is empty. Fill water tank.
• Descale if necessary; see Descaling section.
• Descale if necessary; see Descaling section.
• Descale if necessary; see Descaling section.
• Position capsule correctly. If leakages occur, call
Nespresso.
below 0 °C / 32 °F. Please wait for all buttons to
stop blinking, this may take a few minutes. If buttons
still blink after a few minutes, unplug and replug the
machine.
• If problem persists, call Nespresso.
• Machine triggers descaling alert according
beverages consumption usage. Descale machine.
• Machine triggers descaling alert according
beverages consumption usage. Descale machine
immediately to avoid machine performance and
coffee quality decrease.
• In case of problems, call Nespresso.
capsule container.
• Perform hot water preparation with lever in upward
position.
SOLUÇÃO
BR
故障排除
CN
IL
27