Brother PR-600 Supplementary Manual page 10

Press the "OK" key .
The design color sequence has now been programmed.
Complete all machine preparations as normal.
Press the "Edit End" key and continue programming as needed.
Press the "Sewing" key .
The Screen should appear as such:
Notice to the right of the color sequence boxes, the needle bar to be used is shown.
If this is the first time you program a design using this process, or any time that you return
to this process after programming a design in the previous manner, you will be prompted to
change threads. The change thread screen should appear as such:
Click on the "Close" key .
You are now ready to begin sewing.
If you have any questions, please contact Brother Technical Service.
10