Specifications - Beurer BM 28 Instructions For Use Manual

• A measurement error occurred (
• Air pressure is higher than 300 mmHg (
• A system error occurred (
contact Customer Service.
• Batteries are almost depleted
In such cases, repeat the measurement. Do not move or
speak. If necessary, replace the batteries.

12. Specifications

Type BM 28
Measurement Oscillometric, non-invasive blood
method pressure measurement on the upper
arm
Measurement Cuff pressure 0-300 mmHg,
range Systolic 50-280 mmHg,
Diastolic 30-200 mmHg,
Pulse 40-199 beats per minute
Display accuracy Pressure ± 3 mmHg,
Pulse ± 5%
Dimensions 5.3 in L x 4 in W x 2.4 in H
(134 mm L x 103 mm W x 60 mm H)
Weight 13 oz (367 g) with cuff, no batteries
Cuff size 8.7 - 16.5 in (22 - 42 cm)
)
)
4
). If this error reoccurs,
4
4
.
Operating Range 50° F - 104° F (10° C - 40° C), 10 - 85%
relative humidity (non-condensing)
Storage Range -4° F - 131° F (-20° C - 55° C), 10 -
90% relative humidity
Power supply 4 x 1.5 V
Battery life Approx. 300 measurements
The serial number is located on the device or in the battery
compartment. These specifications are subject
to change without notice for purpose of improvement.
• This unit is in line with European Standard EN 60601-1-2
(In accordance with CISPR 11, IEC 61000-3-2,
IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3,
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6,
IEC 61000-4-8 and IEC 61000-4-11) and is subject to
particular precautions with regard to electromagnetic
compatibility (EMC). Please note that portable and mobile
HF communication systems may interfere with this unit.
• This device is in line with the EU Medical Devices
Directive 93/42/EEC, the "Medizinproduktegesetz"
(German Medical Devices Act) and the standards EN
ISO 81060-1 (non-invasive sphygmomanometers, Part
1: Requirements and test methods), EN 1060-3 (non-
invasive sphygmomanometers, Part 3: Supplementary
16
AA batteries