Waring CB15 Series Manual page 9

5. Push the UP arrow to set the time required. The timer
will advance only in 10-second intervals. Timer can be
set to the maximum of 3 minutes.
6. Select and press a speed button; the blender will
start and run for the selected time. It will count down
in 1-second intervals and stop at 0. NOTE: If you
want to increase or decrease time while timer is
counting down, press UP or DOWN arrows. Timer will
increase or decrease in 10-second intervals. After 5
seconds, the timer will turn off and return to manual
mode.
7. When using the timer again, the initial time will be the
last time set. NOTE: If unit has been unplugged, the
timer will default back to 10 seconds.
8. Always hold container with one hand when starting
and while blending. Never operate without container
lid properly clamped in place.
9. Allow motor to come to a complete stop before
removing container. Never place the container on the
motor base or remove it from the motor base while
the motor is running.
10. Press the STANDBY button again to turn off the
blender.
11. Remove the container from the motor base and
empty the contents.
12. Wash and dry container after each use. See Cleaning
and Sanitizing Instructions starting on page 14.
13. Not for water-jet cleaning.
14. The use of ear protection is recommended during
extended operating periods.
9