Using The Memory Function; Embroidery Data Precautions; Types Of Embroidery Data That Can Be Used; Types Of Usb Devices/Media That Can Be Used - Brother Innov-is 2500D Operation Manual

USING THE MEMORY FUNCTION

Embroidery Data Precautions

Observe the following precautions when using embroidery data other than that created and saved in this machine.
• When using embroidery data other than our original patterns, the thread or needle may break when sewing with a
stitch density that is too fine or when sewing three or more overlapping stitches. In that case, use one of our original
data design systems to edit the embroidery data.

■ Types of Embroidery Data that can be Used

• Only .pes,.phc, and .dst embroidery data files can be used with this machine. Using data other than that
saved using our data design systems or sewing machines may cause the embroidery machine to malfunction.

■ Types of USB Devices/Media that can be Used

Stitch data can be saved to or recalled from USB media. Use media that meets the following specifications.
• USB Floppy disk drive
• USB Flash drive (USB Flash memory).
• USB CD-ROM, CD-R, CD-RW drives (recalling only)
Memo
Stitch/embroidery data cannot be saved using a USB CD-ROM, CD-R or CD-RW drive.
You can also use the following types of USB media with the USB Memory Card Reader/Writer.
• Secure Digital (SD) Card
• CompactFlash
• Memory Stick
• Smart Media
• Multi Media Card (MMC)
• XD-Picture Card
Note
• Some USB media may not be usable with this machine. Please visit our web site for more details.
• USB hubs cannot be used with this machine. The machine will not recognize the above USB devices or USB memory
cards through a USB hub.
• The access lamp will begin blinking after inserting USB Devices/Media, and it will take about 5 to 6 seconds to recognize
the Devices/Media. (Time will differ depending on the USB Device/Media).
Memo
• When a file folder is necessary to create, use a computer.
• Letters and numerals can be used in the file names. In addition, if the file name contains no more than eight characters,
the entire file name will appear on the screen.
If the file name is more than eight characters long, only the first six characters followed by "~" and a number appear as the
file name.
CAUTION

USING THE MEMORY FUNCTION

5
153