Locking The Screen - Brother Innov-is 2500D Operation Manual

b
Press to select the automatic thread
cutting setting.
→ The key appears as
c
Place the fabric under the presser foot with the
needle at the starting point of the stitching, and
then press the "Start/Stop" button. The
machine will automatically sew reverse stitches
(or reinforcement stitches), and then begin
sewing.
a
a
Reverse stitches (or reinforcement stitches)
Memo
If you press the "Start/Stop" button to pause sewing,
then press it again to continue, reverse stitches (or
reinforcement stitches) will not be sewn.
d
If the "Reverse/Reinforcement Stitch" button
is pressed, the machine automatically sews
reverse stitches (or reinforcement stitches),
then cuts the thread.
a
Reverse stitches (or reinforcement stitches)
Memo
To cancel the automatic thread cutting setting, press
again so that it appears as
.
a
.

Locking the Screen

If the screen is locked before starting to sew, the various
settings, such as the stitch width and stitch length, are
locked and cannot be changed. This prevents screen
settings from accidentally being changed or the
machine from being stopped while large pieces of
fabric or other projects are being sewn. The screen can
be locked while sewing utility stitches and character/
decorative stitches.
a
Select a stitch pattern.
b
If necessary, adjust any settings, such as the
stitch width and stitch length.
c
Press .
→ The key appears as
d
Sewing begins.
e
When you are finished sewing, press
unlock the screen.
Note
• When the screen is locked (
than and the
be operated. To select a different stitch pattern or
change the settings, press
as to unlock the screen.
• When the screen is locked, pressing any of the
• The screen is unlocked when the machine is turned
off.
USEFUL FUNCTIONS
.
to
), no key other
keys can
so that it appears
keys unlocks the screen.
2
47