Embroidering Appliqué Patterns - Brother Innov-is 2500D Operation Manual

Embroidering Appliqué Patterns
There are some patterns which call for an appliqué
inside the pattern.
When sewing an embroidery pattern with an appliqué,
the color sewing order display shows "APPLIQUÉ
MATERIAL", "APPLIQUÉ POSITION", "APPLIQUÉ",
and then the sewing order of the colors around the
appliqué.
Memo
• When "Appliqué Material", "Appliqué Position" and
"Appliqué" are displayed, a specific color does not
appear. Use a proper color thread to match the
appliqué piece.
• The following design is not preprogrammed in the
machine and is used for illustration purposes only.
a
Attach iron-on stabilizer to the wrong side of
the appliqué fabric.
a Appliqué fabric (cotton, felt, etc.)
b Stabilizer
b
Hoop the appliqué fabric (from step
the embroidery frame, and then press the
"Start/Stop" button to sew material of the
appliqué design.
a Outline of appliqué
b Appliqué fabric
→ The machine sews the outline of the appliqué, then
stops.
Memo
The embroidering procedure is the same as the basic
procedure described in "Sewing Embroidery Patterns"
on page 142.
a
b
a
) in
a
b
SEWING AN EMBROIDERING PATTERN
c
After sewing is finished, remove the appliqué
fabric from the embroidery frame, and then
carefully cut along the stitching.
Note
Carefully cut out the appliqué along the outline that
was sewn. If the appliqué is cut out along the inside of
the outline, the appliqué fabric may not be caught by
the stitching. If this step is not performed correctly, the
appliqué will not be sewn correctly. In addition,
carefully remove any excess threads.
d
Hoop the base fabric in the embroidery
frame.
a Base fabric
e
Press the "Start/Stop" button to sew the
position of the appliqué.
* Use the same color of thread to be used to attach the
appliqué.
a Appliqué position
b Base fabric
→ The machine sews around the position of the
appliqué, then stops.
a
a
b
5
143