Designing A Stitch - Brother Innov-is 2500D Operation Manual

DESIGNING A STITCH

DESIGNING A STITCH

By using the MY CUSTOM STITCH
register stitches you have created yourself.
Memo
• Stitches that you create with MY CUSTOM
™
STITCH
inch) wide and 37 mm (approx. 1-1/3 inches) long.
• Stitches can be designed more easily with MY
CUSTOM STITCH
the included grid sheet.
a
Draw the stitch design on the grid sheet (part
code SA507, X81277-050).
Memo
Simplify the design so that it can be sewn as a
continuous line. For a more attractive stitch, close the
design by intersecting lines.
If the design is to be repeated and linked, the start
point and end point of the design should be at the
same height.
184
™
function, you can
can be a maximum of 7 mm (approx. 9/32
™
if you first draw the stitch on
b
Decide the spacing of the stitch.
* By adjusting the spacing of a stitch, you can create
various patterns with one stitch.
c
Place points where the pattern intersects with
the grid, and connect all the points with a
line.
d
Determine the x and y coordinates of each of
the marked points.
Memo
This will determine the stitch design that will be sewn.