Table of Contents
Advertisement
40
ACS580-0P, packaged drive with circuit breaker disconnect and two-contactor
bypass, UL (NEMA) Type 12
Dimension
Reference
CX12-21
CX12-22
CX12-23
CX12-24
CX12-25
CX12-26
H1 - Height
H2 - Mounting Height
W1 - Width
W2 - Mounting Width
W1
W2
WARNING
!
WARNING
RISK OF FIRE OR ELECTRIC SHOCK-
Wait at least 5 minutes after disconnecting
Consult the Installation & Start-Up Manual
supply before continuing to work.
The opening of the branch-circuit protective device may
before working on the frequency converter.
be and indication that a fault current has been
!
ATTENTION!
interrupted. All current-carrying parts and other
components protected by this device should be
de l'alimntation pour travailler sur l'appareil.
Attendre au moins 5 min apres sectionnement
examined and replaced if damaged. If burnout of a
Consulter le Manuel d'installation et de mise
current element of an overload relay occurs, the
end route avant d'intervenir sur le convertisseur
de frequence.
complete overload relay must be replaced.
CAUTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
ATTENTION
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
H2 H1
OFF
DRIVE
BYPASS
ACS580-0P with Bypass
Height (H1)
Height (H1)
in
mm
in
24.00
610
22.50
30.00
762
28.50
36.00
914
34.50
48.00
1219
46.50
72.00
1829
58.60
84.00
2134
n/a
D
W1
W2
WARNING
!
WARNING
RISK OF FIRE OR ELECTRIC SHOCK-
Wait at least 5 minutes after disconnecting
The opening of the branch-circuit protective device may
Consult the Installation & Start-Up Manual
supply before continuing to work.
be and indication that a fault current has been
before working on the frequency converter.
!
ATTENTION!
components protected by this device should be
interrupted. All current-carrying parts and other
examined and replaced if damaged. If burnout of a
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
current element of an overload relay occurs, the
Consulter le Manuel d'installation et de mise
de frequence.
end route avant d'intervenir sur le convertisseur
complete overload relay must be replaced.
CAUTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
ATTENTION
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
OFF
DRIVE
BYPASS
Supplemental Installation Manual for ACS580-0P
Width (W1)
Width (W2)
mm
in
mm
in
572
18.00
457
16.50
724
24.00
610
22.50
876
30.00
762
28.50
1181
36.00
914
34.50
1488
36.00
914
34.50
n/a
48.00
1219
n/a
D
H2
H1
WARNING
RISK OF FIRE OR ELECTRIC SHOCK-
be and indication that a fault current has been
The opening of the branch-circuit protective device may
interrupted. All current-carrying parts and other
examined and replaced if damaged. If burnout of a
components protected by this device should be
current element of an overload relay occurs, the
complete overload relay must be replaced.
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
ATTENTION
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
Depth (D)
Weight
mm
in
mm
lb
419
15.00
381
85
572
15.00
381
155
724
15.00
381
207
876
21.00
533
410
876
20.90
531
608
n/a
23.30
592
W1
CAUTION
!
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
!
ATTENTION!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
OFF
DRIVE
BYPASS
H1
kg
39
70
94
186
276
950
432
D
Advertisement
Table of Contents
