Replenishing Salt - Miele G7104 Operating Instructions Manual

Using for the first time

Replenishing salt

 When 
Refill salt
display wait until the end of the
programme and then refill the salt
reservoir.
 Confirm with OK.
The salt refill indicator will go out.

Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the dishwasher load.
Each time you have opened the salt
reservoir lid, immediately run the 
65 °C QuickPowerWash programme
with the  Express option and
without any dishes. This will dissolve
and remove any traces of salt from
the wash cabinet.
28
appears in the
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. In this
case, confirm with OK again.
The salt refill indicator is deactivated if
the dishwasher is set to a water
hardness below 0.9 mmol/l (5 °dH -
German scale).