Standard Settings; Setting The Language; Setting The Water Hardness - Miele G7104 Operating Instructions Manual

Using for the first time

Standard settings

Switching on the dishwasher
 Switch the dishwasher on with the
 button.
The welcome screen will appear when
the dishwasher is switched on for the
first time.
For further information about the
display functionality, see "Guide to the
appliance - Display functions".

Setting the language

The display will change automatically to
the screen for setting the language.
 Select the language and the country,
if applicable, using the  buttons
and confirm with OK.
For further information on setting the
language, see "Settings - Language".
A tick  will appear next to the
language that has been set.
24

Setting the water hardness

The display will change to the screen
for setting the water hardness.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale), always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °dH in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________ mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
0.36 mmol/l (2 °dH - German scale).
 Set the water hardness level in your
area and confirm with OK.
See "Settings - Water hardness" for
more information.