Table of Contents
Advertisement
Replenishing salt
When the Salt indicator lights up,
wait until the end of the programme
and then refill the salt reservoir.
Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the dishwasher load.
Each time you have opened the salt
reservoir cap, immediately run the
65 °C QuickPowerWash
programme with the Express
option and without any dishes. This
will dissolve and remove any traces
of salt from the wash cabinet.
Using for the first time
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. It will go
out once the salt concentration has
reached the correct level.
The salt refill indicator is deactivated if
the dishwasher is set to a water
hardness below 0.9 mmol/l (5 °dH -
German scale).
25
Advertisement
Table of Contents
