Miele G7104 Operating Instructions Manual page 10

Warning and Safety instructions

Ensure that the connection data on the dishwasher's data plate
(fuse rating, frequency and voltage) match the electricity supply to
prevent damage to the dishwasher. Compare these before
connecting the appliance to the mains electricity. If in any doubt,
consult a qualified electrician.

Do not connect the dishwasher to the electricity supply until it has
been fully installed and any adjustment has been made to the door
springs.

The dishwasher may only be operated if the door opening
mechanism is working correctly, as otherwise there could be a
danger when the automatic door opening is activated (depending on
the model).
To check that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). The door must not fall open on
its own beyond this point.
- The door locking pin retracts automatically after the drying phase
when the door is opened.

Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (e.g. danger of overheating). Do not
connect the dishwasher to the electricity supply using a multi-socket
adapter or an extension cord.

The dishwasher must not be installed and operated in mobile
locations (e.g. on a ship).

Do not install the dishwasher in a room where there is a risk of
frost. Frozen hoses can break or burst. The reliability of the electronic
control unit may be impaired at temperatures below freezing point.

To avoid any damage to the dishwasher, it must only be operated
when it is connected to a fully vented plumbing system.
10