Ecofeedback Consumption Display - Miele G7104 Operating Instructions Manual

Caring for the environment
EcoFeedback consumption
display
The "Consumption" function is used for
calling up information about the energy
and water consumption of your
dishwasher (see "Settings -
Consumption (EcoFeedback)").
The following information can be
viewed in the display:
- An estimate of the consumption
before the programme begins
- The actual consumption at the end of
the programme
- The total consumption of the
dishwasher to date
1. Consumption estimate
After a programme has been selected,
first the name of the programme and
after a few seconds the estimated
energy consumption  and water
consumption  will appear in the
display.
The estimated consumption will be
shown as a bar chart. The more bars
are shown (  ), the higher the energy or
water consumption.
The values are influenced by the
programme, any programme options
selected, the ambient conditions and
the size of the load.
The display will change automatically
from showing the estimated
consumption to showing the time
remaining.
38
The estimated consumption function is
activated as standard. It can be
deactivated, if preferred (see "Settings -
Consumption (EcoFeedback)").
2. Displaying consumption
At the end of the programme, you can
call up the actual energy and water
consumption for the programme that
has just been run.
 Confirm the message
with OK.
(OK)
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the
programme that has just been run.
3. Total consumption
You can call up the total consumption
of energy and water for all programmes
you have run on your dishwasher to
date (see "Settings - Consumption
(EcoFeedback)").
Consumption