Display Functions - Miele G7104 Operating Instructions Manual

Guide to the appliance

Display functions

The display is used to select or set the
following:
- further programmes
- the timer
- the Settings 
The display can show the following:
- the programme stage
- the estimated time left for the
programme to run
- the energy and water consumption
(EcoFeedback)
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the  button to switch the
dishwasher back on.
20
The OK button is used to confirm
messages or settings and also to move
to the next menu or another menu level.
Under  Further programmes/Settings,
a scroll bar  will appear in the right of
the display. This offers further options.
These options can be viewed using the
 buttons.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option that is selected will have a
tick  next to it.
To exit a submenu, press the
 Back button.
If you do not press any buttons for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.