Prepare The Door Frame - Igloohome Smart IoT Deadbolt Installer/User Manual

Prepare the Door Frame

Ensure to align the lock to the door frame
and mark it down.
Secure strike plate housing and strike
plate using 2x 25mm (0.98") wood screws.
18
Door
Frame
25mm (0.98")
Spade Bit
Mark & Drill Hole
Same height
1mm
(0.0039")
Mark out where the bolt tongue locks then
drill a corresponding hole on door frame.
Chisel to fit the strike plate in as well.
20mm (0.78")
Chisel
Paste the magnet opposite the door
4
sensor.
Door Sensor Door
Magnet Sensor
58mm
(2.28")