Alarm Menu - Desert Aire CM3510 Series Installation And Operation Manual

3.0

Alarm Menu

To view the alarms from any menu, simply press the ALARM key. If no alarms are active, the
display will state NO ALARMS ARE ACTIVE. See Figure 96.
When an alarm is triggered, the red LED behind the ALARM key will light and will remain on
until the alarm is reset. If an alarm is present, pressing the ALARM key will display a screen
similar to Figure 106. The triggered alarm will be displayed along with the time and date. The
bottom lines will display two pertinent data point values when the alarm occurred.
To reset the alarm, use the DOWN key until the reset instructions are shown. See Figure 98.
Pressing the ALARM key for three seconds will reset all active alarms.
56
Desert Aire - CM3510 Manual
Figure 96
Figure 97
Figure 98