Desert Aire CM3510 Series Installation And Operation Manual page 32

32
Desert Aire - CM3510 Manual
Figure 42
Pressing the DOWN key will display the Manual Damper
Setup screen shown in Figure 43. To set the damper in
Manual mode, change the 'A' to 'M'. Modify the percentage
setting to move the actuator. Note that these settings are lost
on a power cycle, so the unit will return to normal control
mode.
Figure 43
Pressing the DOWN key will display the Manual Air Heat
Control screen shown in Figure 44. To set the heat in Manual
mode, change the 'A' to 'M'. Modify the percentage to set the
amount of heat. Note that these settings are lost on a power
cycle, so the unit will return to normal control mode
Figure 44