Table of Contents
Advertisement
3.
Alarm Menu (Figures 57 - 59)
To view the alarms from any menu, simply press the ALARM key. If no alarm is active, the
display will state NO ALARMS ARE ACTIVE. See Figure 57.
When an alarm is triggered, a red LED behind the ALARM key will light up, and remain lit
until the alarm is reset. If an alarm is present, pressing the ALARM key will display a screen
similar to Figure 58. The triggered alarm will be displayed along with the time and date.
The bottom lines will display two pertinent data point values when the alarm occurred.
To reset the alarm, use the DOWN key until the reset instructions are shown. See Figure 59.
Pressing the ALARM key for three seconds will reset all active alarms.
Figure 57
Figure 58
Desert Aire - CM3540 Manual
45
Advertisement
Table of Contents
