Digital Outputs (Binary) (Figures 78 - 81) - Desert Aire CM3510 Series Installation And Operation Manual

48
Desert Aire - CM3510 Manual
The ninth page shows the readings of optional air pressure differential
sensors for Return Air and Outdoor Air filter sensing.
To return to the I/O STATUS screen, press the Esc key.
2.3.3.3.3 Digital Outputs (Binary) (Figures 78 - 81)
The Digital Outputs Screens shows the state of the devices turned on
and off by the control system. The first page shows the state of the
first six outputs.
• The first line will show the status of NO1, Circuit A Lead Compressor
contact, "On" and "Off".
• The second line will show the status of NO2, Circuit A Lag
Compressor contact, "On" and "Off".
• The third line will show the status of NO3, Circuit A 1Sol contact,
"On" and "Off".
• The fourth line will show the status of NO4, Circuit B Lead
Compressor contact, "On" and "Off".
• The fifth line will show the status of NO5, Circuit B Lag Compressor
contact, "On" and "Off".
• The sixth line will show the status of NO6, Circuit B 1Sol contact,
"On" and "Off".
Figure 77
Figure 78