Location Of Bosch Battery Charge Port - Whyte e-MTB HardTail Series Service Manual

7.2: Location of the Bosch PowerTube On/Off button.
The location of the Bosch PowerTube On/Off button is located under the DownTube Cover. Refer to Bosch PowerTube instruc-
tions for the function of this aspect of the Bosch PowerTube.
Figure 7: Closed Position

7.3: Location Of Bosch Battery Charge Port.

IMPORTANT: At all times follow closely all recommendations from Bosch contained in the relevant Bosch Customer User
Manual documentation material bundled with your bike (or consult the on-line Bosch resources) to fully understand how
to re-charge, handle and store your Bosch Battery. Failure to comply with all Bosch recommendations could lead to fail-
ure of the battery function, and risk of fire leading to serious injury and death.
The position of the remote charge port for the Bosch Battery has been integrated into the side of the Motor Mount as can be
seen in Fig.7 and Fig.8. To access the charge port, peel back the sealed cover of the Charge Port marked "Whyte Energy" to
reveal the charge port. Follow the instructions contained in the Bosch Battery Instruction Manual to Charge the Battery. When
Charging has finished, re-fit the Remote Charge Port Cover and press firmly to seal the Cover over the Charge port to prevent
ingress of mud and water and other contaminants. Failure to correctly secure the sealed cover can lead to corrosion and failure
of the charge port component.
Figure 6: Bosch Battery:
Location of Bosch Power-
Tube On/Off Button with
Battery Fitted into Down
Tube and Down Tube Bat-
teryCover removed.
Figure 8: Open Position