1.
Assemble the belt
section on 2 to 4 leg
sets.
Note:
• Assemble one leg set each
in the direct vicinity of the
drive and return unit.
• Assemble the leg
sets under the cross
connectors of the belt
section.
• Maximum distance
between 2 leg sets:
2000 mm.
7.6 Assembling the product
7.6.1
Assembling the belt section on leg sets
BS 2/...
Fig. 3:
Assembling the belt section on leg sets (1/2)
SZ 2
3 842 358 724/2013-04, MIT: BS 2/C-... + BS 2/R-..., Bosch Rexroth AG
Assembly
19/76
SZ 2
SW13
M = 25 Nm
D
547 601-02