Page 1
TTVLK-8 Tripod Vlogging Kit with 8 in. Ring Light You’re on steady ground ®...
Page 2
INTRODUCTION Thank you for choosing Oben. The Oben TTVLK Tripod Vlogging Kit features a desktop tripod, accessory arm, USB-powered LED ring light, and a smartphone clamp. It puts the tools you need to set up a vlog or video meeting anywhere.
Page 3
OVERVIEW Ring Light LED array 1/4-20 mounting socket USB cable Connect to a computer or USB plug adapter.
Page 4
OVERVIEW Ballhead 1/4-20 screw 1/4-20 accessory socket Attach to smartphone Attach the accessory adapter. arm. Locking knob 1/4-20 socket Loosen to adjust the Screw onto the angle. Tighten to secure. tabletop tripod. 90° notch Switch from horizontal to vertical camera orientation.
Page 5
OVERVIEW Accessory Arm 1/4-20 screw 1/4-20 locking nut Attach to the tripod accessory socket. Important! For secure support of the ring light, Thumbscrews make sure the accessory arm is positioned directly over one of the legs.
Page 6
OVERVIEW Tripod 1/4-20 screw Leg release button Attach the ballhead. Press to spread the legs to the maximum base. Close the legs to use the tripod as a handheld grip. Important! Set the tripod to its widest base when the ring light is attached.
Page 7
OVERVIEW Controller Color temperature Brightness Select cool, warm, or Press repeatedly to neutral color temperature increase or decrease settings. the 10-step brightness. Power button Press to turn the light on or off.
Page 8
OVERVIEW Smartphone Adapter Smartphone clamp 1/4-20 sockets Fits phones 2.4 to Attach to the ballhead. 3.5 inches wide.
SPECIFICATIONS Specifications Input Power Connector USB Standard-A Color Temperature 3 step (cool, warm, neutral) Brightness 10 step Smartphone Compatibility 2.4 to 3.5 in. (6.1 to 8.9 cm) Cable Length 6.3 ft. (2 m) Dimensions Height: 3.9 in. (9.9 cm) min 6.9 in.
Need help?
Do you have a question about the TTVLK-8 and is the answer not in the manual?
Questions and answers