Miele CS 1011 Converting Instructions page 5

^ Remove the burner grates, the small
burner cap o, the large burner cap
p, the burner ring q and the burner
base r.
^ Pull off the control knob.
^ Loosen the screws w.
^ The combiset surface can now be
removed.
Converting CS 1011
Changing the large burner jet
^ Using a 10 mm wrench, remove the
jet. While doing this, use a 13 mm
wrench to hold the gas tube to
prevent it from twisting.
^ Install the new jet using the same
procedure.
5