Setting The Special Media Lever; Using The Scanner Glass - Brother DCP-1000 Owner's Manual

Setting the Special Media Lever

You can use the special media lever to select the Regular position ( ) or
Special position. ( )
To feed special types of originals (such as coated paper or glossy paper), move
the special media lever to the Special position ( ). It will allow the original to
feed through the ADF without slipping or jamming.
If the original "double-feeds," try again by inserting a single sheet of the original in
the ADF or use the scanner glass.

Using the Scanner Glass

You can use the scanner glass to copy (or scan) one page at a time or pages of a
book. Originals can be letter or A4 size (8.5 inches to 11.7 inches).
To use the scanner glass, the ADF must be empty.
1
Lift the document cover.
2
Using the document guidelines on the left, center the original face down on the
scanner glass.
3
Close the document cover.
If the original is a book or is thick, do not slam the cover or press on it.
G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R
Originals are
Face Down
on the Scanner
Glass
Regular Position
Special Position
Special Media Lever
1 - 5