Setting Up The Machine; Install The Toner Cartridges - Brother MFC-9420CN Quick Setup Manual

Step 1
Install the Toner
1
cartridges
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Remove the protective tape.
2
Open the front cover.
Front cover
3
Remove the protective part.
4

Setting Up the machine

4
Take out all four toner cartridges from the
machine.
5
Carefully pull the red protective paper out of
the machine.
Ensure the laser glass cover is down.
6
Rock the toner cartridge 3 to 4 times.
7
Pull off the tape labelled REMOVE, and
then remove the orange protective cover.
REMOVE tape
Go to the next page
Protective cover