Install The Opc Belt Cartridge - Brother MFC-9420CN Quick Setup Manual

Step 1
Install the OPC Belt
3
Cartridge
Do NOT touch the green surface of
the OPC belt.
Do NOT expose the OPC belt
cartridge to bright room light or
sunlight for more than two minutes
to avoid damaging the belt. Leave
the cartridge in its packaging until
immediately before installing.
1
Lift the Scanner Unit.
2
Lift the Inside cover so that it latches under
the scanner unit.
Inside cover
6
Setting Up the machine
Scanner unit
3
Remove the orange belt tension release
pins from both sides of the OPC belt
cartridge. Remove the protective sheet.
OPC belt
cartridge
4
Put the OPC belt cartridge into the machine
guides with the flat side facing you.
5
Lock the belt cartridge lock levers.
Belt cartridge lock levers
6
Close the Inside cover and then close the
Scanner Unit.
Protective sheet
Belt tension
release pin