Brother MFC-9420CN Quick Setup Manual page 34

Step 2
For Network Interface Cable Users
8
Plug in the power cord and turn on the
machine.
9
Select Network and then click OK.
0
If you want to use the Scan key on the
machine, you must check Register your
computer with the "Scan To" functions
at the machine box and enter a name you
want to use for your Macintosh
Name.
The name can be any name you want up to
15 characters.
(For more information on network scanning,
see Chapter 10 of the Software User's
Guide on the CD-ROM.)
32
Installing the Drivers & Software
®
A
Click Browse.
B
Select your model name, and then click OK.
Click OK again to close the
DeviceSelector.
C
Select Applications from the Go menu.
in Display
D
Open the Utilities folder.