Step 1 Setting Up The Machine; Removing The Protective Parts; Installing The Handset; Opening The Document Support And Document Tray - Brother MFC-3360C Quick Setup Manual

STEP 1
Setting Up the Machine
1
1 Removing the protective
parts
1
Remove the protective tape.
2
Remove the foam bag containing the ink
cartridges from on top of the paper tray.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
2

Installing the Handset

1
Connect the curled handset cord to the
machine and the other end to the handset.
3 Opening the document
support and document tray
1
Open the document support (
document tray (
extension (
4
) and the
) and then pull out the
).
1
2
3
4

Loading paper

You can load up to 100 sheets of 80 g/m
(20 lb) paper.
For details, see Acceptable paper and other
media in Chapter 2 of the User's Guide.
1
Pull the paper tray completely out of the
machine. If the paper support flap (1) is open,
close it. Open the output paper tray cover (2).
2
2
If you are using Letter, A4 or Legal size paper,
press and hold universal guide release
button (1) as you slide out the front of the paper
tray to match the paper size you are using.
1
2
1