User's Manual K&F SPECTRA 212i Ceiling Bracket SPECTRA 212i Ceiling Bracket 16.06.2021 06/16/2021 Introduction Icons Used This icon indicates a risk of injury or death. Not following these instructions may result in seri- WARNING ous health problems including potentially fatal injuries.
Standing use, for example, on a stand, is not permitted. Vertical suspension only. Also, be sure to use accessories to the SPECTRA 212i speaker system for stationary indoor in- stallations only. The system is not designed for repeated assembly, reconfiguration, disassem- bly, or transport.
User's Manual K&F SPECTRA 212i Ceiling Bracket SPECTRA 212i Ceiling Bracket 16.06.2021 06/16/2021 Safety Instructions Risks imposed by falling or overturning parts WARNING • Be sure to install, suspend, fasten, and use Kling & Freitag speaker accessories only using the designated fixtures as specified in this document.
User's Manual K&F SPECTRA 212i Ceiling Bracket Installation Required Tools Required Tools IS5 hexagon socket wrench IS6 hexagon socket wrench Preassembling the Speaker When using optional accessories, be sure to follow all instructions in the respective manuals. 1. Mount any optional accessories...
Page 10
User's Manual K&F SPECTRA 212i Ceiling Bracket SPECTRA 212i Ceiling Bracket 16.06.2021 06/16/2021 2. Slightly loosen the mounting- plate fixing screws until you can rotate the plates. 3. Loosen the mounting screws on the speaker. Page 10 of 15 Version 1.0...
Page 11
User's Manual K&F SPECTRA 212i Ceiling Bracket 4. Place the U mounts as appropri- ate. Make sure that the curved parts of the plates are oriented to- wards the front; otherwise, the suspension will be outside the center of gravity.
User's Manual K&F SPECTRA 212i Ceiling Bracket SPECTRA 212i Ceiling Bracket 16.06.2021 06/16/2021 Ceiling mounting Risks imposed by falling parts WARNING • Before installation, consider the load-bearing capacity, strength, and structure of ceilings and formwork. Be sure to use suitable anchors and check for required strength.
User's Manual K&F SPECTRA 212i Ceiling Bracket Maintenance • Perform a visual inspection before each installation. • Visually inspect the entire setup every six months. • When performing those checks, particularly look for deformations, cracks, dents, damage to threads, and corrosion. Also check slings and lifts (e.g. shackles, chains, and steel ropes) carefully for wear and deformation.