User‘s Manual K&F CA 106 PRO U-type Speaker Mount Table of Content Chapter / Content Page Introduction 1.1 Icons Used 1.2 About this user's manual Intended Use Product Description 3.1 Optional Accessories 3.2 Items Included 3.3 Speaker Mount Parts and Features 3.4 Technical Specifications...
User's Manual K&F CA 106 PRO U-type Speaker Mount CA 106 PRO U-type Speaker Mount 23.10.2020 10/23/2020 Introduction Icons Used This icon indicates a risk of injury or death. Not following these instructions may result in seri- WARNUNG ous health problems including potentially fatal injuries.
Unauthorized changes to the product are not permitted. Product Description The CA 106 PRO U-type Speaker Mount is a holder used for suspending or putting up CA 106 PRO speakers. You can direct the speaker properly using the appropriate accessories.
User's Manual K&F CA 106 PRO U-type Speaker Mount CA 106 PRO U-type Speaker Mount 23.10.2020 10/23/2020 Optional Accessories Optional accessories provide for more fastening options: TV spigot 20 mm Colour: black Super Clamp for 30 – 50-mm pipes or plates, 15 kg load (max.), incl. M10...
User's Manual K&F CA 106 PRO U-type Speaker Mount CA 106 PRO U-type Speaker Mount 23.10.2020 10/23/2020 Technical Specifications 3.4.1 Overview Load capacity 1 CA 106 PRO speaker Weight 0.7 kg RAL 9005 (black), standard Colors RAL 9010 (white), standard RAL spot color, on request 3.4.2...
User's Manual K&F CA 106 PRO U-type Speaker Mount Safety Instructions Risks imposed by falling or overturning parts WARNUNG • Be sure to install, suspend, fasten, and use Kling & Freitag speaker accessories only using the designated fixtures as specified in this document.
User's Manual K&F CA 106 PRO U-type Speaker Mount CA 106 PRO U-type Speaker Mount 23.10.2020 10/23/2020 Installation Mounting the Speaker 1. Mount any optional accessories required for installation to the holes provided in the bracket ba- Risks imposed by falling parts...
Page 11
User's Manual K&F CA 106 PRO U-type Speaker Mount 2. Pull the thumbscrews outwards and slightly pull the bracket legs apart. 3. Slide the speaker mount over the side panels of the speaker and align the thumbscrews with the holes centrally located on the speaker side panels.
Page 12
User's Manual K&F CA 106 PRO U-type Speaker Mount CA 106 PRO U-type Speaker Mount 23.10.2020 10/23/2020 4. Align the speaker as desired and tighten the thumbscrews by hand as tight as possible. Risks imposed by falling parts WARNUNG The rubber washers provide for some protection against the thumbscrews loosening. With sta- tionary installations, secure the thumbscrews against loosening using screw-locking fluid.
User's Manual K&F CA 106 PRO U-type Speaker Mount Maintenance. Risk of falling parts due to undetected damage WARNUNG • Visually inspect all speaker accessories before and after use. • With stationary installations, visually inspect the entire setup every six months.