Changing Default Settings - Brother MFC-9160 Owner's Manual

Changing Default Settings

Press Menu/Set, 2 to change default settings for Copy Mode. These settings will remain until you
change them again by pressing Menu/Set. Adjust the Copy Mode and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press
to move through the selections for each setting. Press Menu/Set to save your selection. Press
Stop/Exit—OR—Press
Press Menu/Set, and 2.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
4.PAPER SIZE
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is AUTO, which is
used for originals that contain both text and photographs. TEXT is used for originals containing only
text. PHOTO is used for copying photographs.
1
Press Menu/Set, 2, 1.
2
Press or to choose the type of original (AUTO, TEXT or PHOTO), and then press
Menu/Set.
3
Press Stop/Exit.
to select the next setting you want to change.
AUTO
TEXT
PHOTO
–
THIN
PLAIN
THICK
THICKER
TRNSPRNCY
LETTER
A4
EXECUTIVE
A5
A6
B5
B6
+
is default
Making Copies
or
19