Brother MFC-9120CN Quick Setup Manual page 6

d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark a.
The side to be printed on must be face down.
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed correctly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Unfold the support flap
from sliding off the face-down output tray.
6
to prevent paper
a
1
5
Connect the power cord
and telephone line
IMPORTANT
DO NOT connect the interface cable yet.
a
Make sure that the machine's power switch is
off. Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.