Brother MFC-9120CN Quick Setup Manual page 23

Wired Network
k
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
®
For Windows Vista , when this screen appears,
select the check box and click Install to complete
the installation correctly.
l
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, close your
web browser to return to this window.
Then click Next.
19
Finish and restart
a
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in Start/All Programs/Brother/
MFC-XXXX LAN (where MFC-XXXX is your
model name).
b
If this screen appears, choose the firmware
update setting and click OK.
Note
Internet access is required for the firmware
upgrade.
®
Windows
23