Output Gain; Output Meter - Solid State Logic XLogic Alpha Channel Installation Manual

Low Frequency:
Mid Frequency:
EQ IN
High Frequency:
LF Bell
Select between a 'shelving' or a 'bell' curve:
'
Shelving'
'
Bell'
3-Band EQ
Switchable 'shelving' or 'bell' curves
Parametric with adjustable frequency and 'Q'
Fixed 'shelving' curve
ADC Lock
Indicates that a valid SPDIF signal is present on the SPDIF IN socket
on the rear of the unit and that the ADC is locked to this signal

Output Gain

Provides ±20dB of adjustment
Provides a non-intrusive signal limiter ahead of the
ADC. When switched in, the pre- Insert Send level will
drop by 12dB to enable headroom to be retained under
limiting conditions. The switch will glow 'green' whilst
the limiter is in-active, and change progressively
through 'orange' to 'red' as more limiting is applied.

Output Meter

Measures level before the ADC,
'0' indicates 0dB FS
Lite Limit
EN
DE
FR
ES
IT
5