Olivetti PR 4 Programmer's Manual page 76

Impact printer
Table of Contents

Advertisement

-
The status is transmitted whenever the data sequence for DLE EOT BS n (n = 1) is
received.
Example:
In ESC * m nL nH[d] nL+256xnH, d1 = (10)H, d2 = (04)H, d3 = (08)H, d4 = (01)H.
-
This command should not be contained within another command that consists of two or
more bytes.
Example:
If you attempt to transmit ESC 3 n to the printer, and then DLE EOT BS 1 interrupts
before n is received, the code (10)H for DLE EOT BS 1 is processed as the code for ESC
3 (10)H.
-
This command is unavailable when using the ESC = n (Select Peripheral Device) to
select the printer to be disabled.
-
This command is ignored while the printer transmits reading results of MICR (FS a 0 n,
FS b).
-
When Auto Status Back (ASB) is enabled using the GS a command, the
status transmitted by the DLE EOT BS command and the ASB status must
be differentiated.
-
If the value of n is out of the specified range, the printer ignores this
command.
n = 1: MICR status
Bit
Off/On
Hex
0
Off
00
1
On
02
2
On
04
Off
00
3
Off
00
On
08
4
On
10
5
Off
00
On
20
6
Off
00
On
40
7
Off
00
Bit 2
There may be a time lag between receiving the MICR selection command (FS a 0) and selecting slip paper. During
this period, bit 2 remains 1 (not selected).
Remains 0 (selected) until MICR function completes.
Bit 3:
Becomes 0 (not waiting) just before starting MICR reading, or starting MICR head cleaning, after detecting the
personal check or cleaning sheet, respectively.
Bits 5 and 6:
Transmit the current status of the paper sensors.
References: DLE ENQ n, FS a 0 n, FS a 1, FS a 2, FS b, FS c.
4-40
Decimal
Function
0
Not used. Fixed to Off.
2
Not used. Fixed to On.
4
MICR function selected
0
MICR function not selected
0
Check paper or cleaning sheet insertion: not waiting
8
Check paper or cleaning sheet insertion: waiting
16
Not used. Fixed to On.
0
Check insertion sensor: paper present.
32
Check insertion sensor: no paper.
0
Check ejection sensor: paper present.
64
Check ejection sensor: no paper.
0
Not used. Fixed to Off.
Epson TM-U950 Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents