Table of Contents
Advertisement
-
For the following notes, assume that ESC c 4 is set to stop printing when the absence of
slip paper is detected:
. If the printer is in paper-end and enters in the slip waiting state by feeding a slip with the
feed button, there is no limit on the slip waiting time if the printer is not at the beginning
of a line.
. If the printer is in a paper-end and enters the slip waiting state by attempting to print
double height characters on the last line of the slip, there is no limit on the slip waiting
time.
. When the slip waiting time is set using ESC f t1 t2 and when printing stops because
paper-end is enabled using ESC c 4 n, it is desirable to print on the remaining slip paper
while checking the slip status using GS r 3.
Default:
t1 = 0, t2 = 10
ESC i
Execute partial cut (one point left uncut)
Hexadecimal code: 1B 69
Executes a partial cut with one point left uncut.
Notes: -
In standard mode, this command is enabled only when input at the beginning of a line.
-
This command is available only when receipt paper is selected for printing by ESC c 0.
References: ESC m
ESC m
Execute partial cut
Hexadecimal code: 1B 6D
Executes partial cut of the paper roll, (the same as ESC i).
Notes: -
This command is available only when input at the beginning of a line.
-
This command is available only when receipt paper is selected for printing by
ESC c 0.
References: ESC i
ESC o
Stamp
Hexadecimal code: 1B 6F
Executes stamp printing on the paper roll.
Notes: -
This command is available only when input at the beginning of a line.
-
This command is available only when the paper roll is selected for printing by
ESC c 0.
4-26
Epson TM-U950 Commands
Hide quick links:
Advertisement
Table of Contents
