Setting Your Station Id - Brother MFC-8440 Quick Setup Manual

9

Setting Your Station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press the Menu key.
2
Press the key.
3
Press the key.
4
Enter your fax number (up to 20 digits) on
the dial pad, and then press the Set key.
03.Station ID
Fax:_
Enter & Set Key
5
Enter your telephone number (up to 20
digits) on the dial pad, and then press the
Set key.
(If your telephone number and fax number
are the same, enter the same number
again.)
03.Station ID
Fax:+44XXXXXXXX
Tel:_
Enter & Set Key
Press to enter "+" (plus) character.
6
Use the dial pad to enter your name (up to
20 characters), and then press the Set key.
03.Station ID
Fax:+44XXXXXXXX
Tel:+44XXXXXXXX
Name:_
Enter & Set Key
■ Refer to the following chart for entering
your name.
■ If you need to enter a character that is on
the same key as the previous character,
press to move the cursor to the right.
Press One Two
key time times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
For more details, see "Setting the Station
ID" in Chapter 4 of the User's Guide.
7
Press the Stop/Exit key.
If you want to repeat from step1, press the
Stop/Exit key.
Go to Next page to
install the driver
Three Four
times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
9