Speed-Dialling; Press Search/Speed Dial; Search; Fax Redial - Brother MFC-5440CN User Manual

Speed-Dialling

Search/Speed Dial
Press
number. (See Storing Speed-Dial numbers on page 5-1.)
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.

Search

You can search for names you have stored in the Speed-Dial
memories. Press
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.

Fax Redial

If you are sending a fax manually and the line is busy, press
Redial/Pause
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Colour Start
.
Redial/Pause
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial up to three times at five minutes intervals.
3 - 2 SETUP SEND
#
, , and then the two digit Speed-Dial
Search/Speed Dial
, and then press
only works if you dialled from the control panel.
two-digit number
and the navigation keys to
To search numerically
To search alphabetically*
Mono Start
or
Redial/Pause
or
Colour Start
to try
Mono Start
and or