Step B: Alignment Check - Brother MFC-5100C Owner's Manual

STEP B: Alignment Check

The LCD shows:
Check the 600 DPI and 1200 DPI test prints to see if number 5 most closely
matches number 0. If the number 5 sample of both the 600 DPI and 1200 DPI
are the best matches, press 1 (YES) to finish STEP B –– OR ––
If another test print number is a better match for either 600 DPI or 1200 DPI,
press 2 (NO) to select it.
Do NOT select
For 600 DPI, press the number of the test
print that most closely matches the
number 0 sample (1-8).
For 1200 DPI, press the number of the
test print that most closly matches the
number 0 sample (1-8).
4
Repeat Steps 1 and 2 (in Print Quality Check) to print another sample Print
Quality Check Sheet and then check it.
5
Press Stop/Exit.
When an ink head nozzle is clogged
the printed sample looks like this.
19 - 11
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
}
600 DPI
}
1200 DPI
After the ink head nozzle is cleaned,
the horizontal lines are gone.