Enhance Photos - Brother MFC-495CW User Manual

PhotoCapture Center
e
Repeat step d until you have entered
all the image numbers that you want to
print.
Note
• You can enter multiple numbers at one
time by using the l key for a comma or the
# key for a hyphen. For example, Enter 1,
l, 3, l, 6 to print images No.1, No.3 and
No.6. Enter 1, #, 5 to print images No.1 to
No.5.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
After you have chosen all the image
numbers, press OK again.
g
Enter the number of copies you want
using the dial pad.
h
Do one of the following:
Change the print settings. (See
page 101.)
If you do not want to change any
settings, press Color Start to print.
®
: Printing photos from a memory card or USB Flash memory drive

Enhance Photos

You can edit and add effects to your photos
and view them on the LCD before printing.
• After adding each effect, you can enlarge
• The Enhance Photos feature is supported
Auto Correct
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
b
c
d
e
f
Note
the view of the image by pressing l. To go
back to the original size, press l again.
by technology from Reallusion, Inc.
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Auto Correct.
Press OK.
Note
If Remove Red-Eye appears on the LCD,
press # to attempt to remove red-eye from
your photo.
Press OK and a or b to increase or
decrease the number of copies.
Do one of the following:
Press OK and change the print
settings. (See page 101.)
If you do not want to change any
settings, press Color Start to print.
12
12
12
95