Using A Non-Brother Cordless External Telephone; Using Remote Codes - Brother MFC-495CW User Manual

Brother mfc-495cw: user guide
Hide thumbs Also See for MFC-495CW:
Table of Contents

Advertisement

Using a non-Brother cordless
external telephone
If your non-brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.

Using remote codes

Fax Receive code
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by dialing the Fax Receive Code
l 5 1. Wait for the chirping sounds and then
replace the handset. (See Easy Receive
on page 44.)
If you answer a fax call at the external
telephone connected to the EXT jack of the
machine, you can make the machine receive
the fax by pressing Black Start and choosing
Receive.
Telephone Answer Code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(pseudo/double) ring after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone
connected to the EXT jack of the machine by
pressing Hook.
Telephone Services and External devices
Changing the remote codes
The preset Fax Receive Code is l 5 1. The
7
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
7
d
Press a or b to choose Remote Codes.
e
Press d or cto choose On (or Off).
7
Press OK.
f
Enter the new Fax Receive Code.
Press OK.
g
Press a or b to choose Tel Answer:
and enter the new Telephone Answer
Code.
Press OK.
h
Press Stop/Exit.
Note
• If you are always disconnected when
7
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.
7
7
63

Advertisement

Table of Contents
loading

Table of Contents