Loading Documents; Using The Adf - Brother MFC-495CW User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
Recommended environment
68 to 86 °F (20 to 30 °C)
Temperature:
Humidity: 50 to 70%
Paper:
20 lb LTR (80 g/m
Document Sizes Supported
Length: 5.8 to 14 in. (148 to 355.6 mm)
Width: 5.8 to 8.5 in. (148 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
How to load documents
2
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
2
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or liquid
correction fluid are completely dry.
2
a
b
2
A4)
c
2
d
2
)
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Loading paper and documents
IMPORTANT
Unfold the ADF Document Output
Support Flap (1).
Fan the pages well.
Adjust the paper guides (2) to fit the
width of your document.
Make sure you place your document,
face down, top edge first in the ADF
underneath the guides until you feel it
touch the feed roller and the LCD shows
ADF Ready.
2
IMPORTANT
2
2
1
21