Table of Contents
Advertisement
REMOVING THE PACKAGING FOR INSTALLATION
1. Unpack boxes and check all items are included for installation.
2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to
installation.
3. Identify all of the product components and hardware prior to starting the installation.
4. The bracket must work properly before it is put into service.
5. Refer to the identification of components at the beginning of this user guide if needed.
TOOLS REQUIRED FOR INSTALLATION
Below are the basic tools required for installation. Other tools may also be required. If you have any questions regarding
the installation, or need assistance, please contact our Technical Support team at
9 Phillips Screwdriver
NOTE
9 Electrical tools are not recommended, as there is a potential risk of damage to the threads.
9 Technimount provides screws for the installation of the main assembly.
9 During the installation process, Technimount recommends the use of medium strength thread-locking adhesive
(blue Loctite) to prevent the screws from loosening during normal use. Put a few drops of medium strength thread-
locking adhesive (blue Loctite) on each screw before installation.
www.technimount.com
INSTALLATION GUIDE
BP151 UG 202108-01
techsupport@technimount.com
Return to table of content
15
Advertisement
Table of Contents
