Troubleshooting Table; Problems With Operation - Hanseatic HG4585D10J7636EI User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improper
repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt,
contact our service team for this
(see page EN-39).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers
■
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
The dishwasher cannot
be switched on.
The selected dishwash-
ing programme will not
start or it stops.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
■
Possible cause
The mains plug has not
been inserted into a socket.
There is no voltage being
supplied through the socket.
The dishwasher's door is not
closed properly.
The water tap is not on
properly.
The inlet hose is defective.
There is a risk of overflow-
ing. The electrical water stop
system has been activated.
Troubleshooting table
NOTICE
If water overfl ows, close the water
supply immediately and do this be-
fore contacting the service team
(see page EN-39).
If the water has overfl owed, remove
any water standing in the dishwash-
er before restarting a dishwashing
programme.
Solution
Insert the mains plug into the
socket.
Check the fuse. Check the socket
by connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team
(see page EN-39).
Page EN-35